Set up your Water Polo Board
Setting up a board takes one step, and you only ever do it once. This page loads the software onto a fresh board the first time you build it. After that, the board keeps itself up to date through the app over Bluetooth, so you will never need a cable, or this page, again.
What you need
- A Water Polo Board. See the board page for the small, inexpensive boards that work.
- A USB-C cable that transfers data, not a charge-only one.
- A computer running Chrome or Edge. This does not work in Safari, in Firefox, or on a phone, so reach for a laptop or desktop.
Set it up
- Plug the board into your computer.
- Press the button above, and pick your board when the browser asks.
- Let it run. It takes about two minutes, and you do not need to do anything while it works.
- When it finishes, unplug the board. It is ready to pair with the app.
This is a one-time setup. From here on, updates reach the board through the app on their own. You will not need a computer, a cable, or this page again.
The firmware is provided as is. By setting up a board, you accept our Terms of Use.